Liquid-cooled Battery Container
ECO-B20FT3858LP
The 20-ft liquid-cooled ESS container product integrates PACK, EMS, BMS, HVAC, fire safety system into one container. Compared with the air cooling, the liquid cooling empowers the ESS product with higher power density and ensures the cell temperature dierence less than 3°C, which effectively extends battery service life and improves energy efficiency. The 20-ft liquid-cooled ESS container product can be applied to power generation side, grid side, as well as C&I ESS scenarios which has strict requirements on power and capacity
The 20-foot liquid-cooled energy storage container
has a maximum capacity of 3.44MWh, providing
higher energy density, and saving costs.
The variable-frequency compressor adjusts its
operating status based on temperature conditions,
thus reducing the equipment’s power consumption.
The product significantly reduces the use of fans,
resulting in lower noise compared to air-cooled
products.
The cell temperature consistency extends the battery
service life by 5% enhances the safety of batteries,
and increases returns.
In comparison to air cooling, the liquid cooling
scheme keeps cell temperature difference less than 3°C, which improves cell voltage consistency.
The product utilizes the IP55 (PACK IP65) high protection level & C4 protection level and the high/low-temperature
design.
Item |
Specification |
Cell type |
LFP314Ah |
Configuration |
10P384S |
Rated Energy |
3.44MWh |
Rated Voltage |
1228.8Vdc |
Voltage Range |
1075-1382Vdc |
PACK Ingress Rating |
IP65 |
Rated Charge/Discharge Rate |
0.5P |
Operating Temperature |
-25℃~55℃ |
Fire Safety |
Aerosol+water |
Ingress Rating |
IP55 |
Cooling |
Chiller+liquid cooling |
Altitude |
≤2,000m (derating above 2,000m) |
Dimensions (W*D*H) |
6,058mm x 2,438mm x 2896 mm |
Weight |
35 t |
Compliance |
Pack: IEC62619/IEC63056/UL950A,UN38.3 |